Services

Extensive In-Home Testing with Four Digital Meters

An In-Home Consultation is done using several different high-end meters,

and takes approximately 2 hours depending on the size of the home and the amount of electrical devices & appliances you have. Prior to beginning the EMF testing, the house wiring will be tested to insure that the hot, neutral and ground are connected properly and that there are no wiring faults.

A Milligaussmeter is used to detect signals emitted by most home electronics such as computers, TV's, and home appliances. It can also measure emissions from the breaker box and house wiring.

An RF Meter is used to measure emissions from WiFi Routers, SMART Meters, Cell Phones, nearby Cell Towers, and other emissions at higher frequencies.

A Dirty Electricity Meter is used to measure the amount of "dirty electricity" on your house wiring from home electronics. Modern Digital Devices use high-frequency power supplies that cause harmonics to go back into the house wiring. This is different than EMF Emissions from those devices.

A Body-Voltmeter is used to measure the actual voltage on your skin at various locations in your home where you spend a lot of time.

A Seven-Day Rental of the first 3 Meters shown above is available for about $225, but you must first learn to competently use all three of the meters. It's a good idea to test again after you install any shielding materials to make sure you are improving the situation and not making it worse. And the rental does not include the Body-Voltmeter, so you would be missing that part of the testing.

For roughly the same price, you can have an expert come to your home and take the measurements for you. After the readings are taken, various solutions and options will be discussed as is needed or are appropriate for your exposure levels. I do not sell or stock shielding products directly, I am simply a consultant and I connect my customers directly to my sources. This allows me to keep the solution prices as low as possible for my customers, as there is no mark-up on the price and everything is so easy to install that almost anyone can do it.

An In-Home consultation is the BEST SOLUTION to determine exactly what your exposure levels are, especially where you spend the most time, and to provide specific solutions as needed. Additional testing is also available at a discount after any shielding work is done to insure that the shielding is in fact helping and not making things worse. This is important and would require renting the meters twice.

The initial In-Home Testing & Consultation fee is $250 for the first two hours, and $90/hr for each additional hour. Re-testing after shielding is installed is discounted to only $60/hr. So the net cost for testing is far less with an in-home consultation, and you get the added benefit of my decades of experience across multiple related careers to help you figure out what it is the meters are detecting and how best to solve the problem. Electropollution is the 21st Century's version of "cigarette smoke," the evidence is now conclusive and it's up to each person to protect themselves and their loved ones.